Welcome to our comparison guide between Linksys Velop Vs Netgear Orbi Wifi Mesh Systems. These systems are currently two of the top-line wireless technologies and many people are wondering which one is the best for their home, so we’ll try to help you out in this article.
If you are tired of slow internet or reduced wireless coverage due to using the wrong WiFi devices or because your home is too big for just one WiFi router, then it’s about time that you invest in a WiFi mesh network system which covers wider areas and is much more reliable than a single WiFi device.
Before the mesh networks were introduced to the world, people relied upon simple routers and often suffered slow network and dead spots because of weaker signals even in short ranges.
Mesh networks allow you to extend your wireless signal coverage by placing additional devices (WiFi nodes) around your home thus creating an “umbrella” (mesh) network. Each wireless device communicates with the other nodes seamlessly and provides full WiFi speed and connectivity around its area.
Setup of mesh wireless systems is quite easy, and they do not require any wiring between the nodes. It means that there’s no need to worry about rewiring your house or relying on the previously installed old wire networks.
Also, the mesh network is viewed as a single network (one SSID) from all of your WiFi connected devices (smartphones, laptops etc) without having to login to different routers and without any interruptions even if you are moving around the house.
Linksys Velop vs Netgear Orbi – Comparison Table
Let’s see a quick comparison of the two products before moving on with more detailed descriptions. Below we are showing a side-by-side comparison table of the most important features to get a quick idea of the differences between the two systems.
EDIT: The products in the table below are using the WiFi 5 (802.11AC) standard which is still popular but will be gradually replaced by the newest WiFi 6 (802.11AX) technology. The new comparison article here, is focused on the newest Netgear Orbi and Linksys Velop mesh models which are based on the new WiFi6 standard.
(depending on kit)
(depending on kit)
4 LAN (Satellites)
NO Web Browser
YES Web Browser
(depending on kit)
NO Web Browser
(depending on kit)
4 LAN (Satellites)
YES Web Browser
Last update on 2023-03-22 at 21:05 / Affiliate links / Images from Amazon Product Advertising API
Linksys Velop Review
- Apple HomeKit Enabled
- Ideal for multi-story 3-5 bedroom homes (up to 4,000 square feet)
- Provides fast, reliable Wi-Fi coverage for 4K streaming, gaming and more
Last update on 2023-03-22 at 21:05 / Affiliate links / Images from Amazon Product Advertising API
A mesh wireless device, the Linksys Velop, promises solid and fast connection throughout your house. The developers of Linksys Velop have done an amazing job when it comes to the range and speed of this product.
This is a true mesh system since all Velop nodes communicate directly with all other nodes in the network. You just need to connect one of the nodes to your ISP modem/router or you can even configure one of the Velop nodes to act as the ISP router for connecting to the Internet (using PPPoE for example).
Important Features
- Area coverage of 2000, 4000, 6000 square feet (1-pack, 2-pack, 3-pack respectively),
- WiFi Speed: 2200 Mbps (theoretical maximum) for an AC2200 model.
- Tri-band WiFi technology.
- WAN/LAN Ethernet ports.
- Works with any ISP supplied modem (Verizon Fios, AT&T, Spectrum, Xfinity etc)
- Alexa Integration.
- 2.4 GHz Radio Frequency (802.11b/g/n), 5 GHz Radio Frequency (802.11 n/ac).
- Seamless roaming technology (all nodes form a single mesh network).
- Security: WPA2-Personal encryption
- Quadcore Qualcomm chipset with MU-MIMO technology
- Bluetooth for App-based setup.
- 2,000 sq. ft. per node coverage (add nodes for more coverage).
- Access to advanced features via Linksys Velop mobile app – parental controls, beta level Bride mode, device prioritization, VPN pass-through support, wireless MAC filtering, guest access etc.
- Great area coverage.
- Very stable connectivity.
- Stylish with minimal footprint.
- Easy to setup.
- 3-year warranty and 24×7 reliable support.
- No web-based management (only via the mobile App).
- More expensive compared to similar products.
- Only 1 LAN Ethernet port for wired connections.
- No USB port for connecting external devices.
- Can’t be mounted on wall or ceiling.
- WiFi speed performance is much lower compared to Netgear Orbi (based on independent tests).
Linksys uses the new 802.11ac industry’s leading technology known as BeamForming. While older Wi-Fi systems usually broadcast everywhere, BeamForming scans the overall area and focuses on the spot where a device is connected to the signal.
Apart from that, the feature of device prioritization makes sure that your favorite device receives the best connection as compared to rest of the connected devices. You can add a total of 3 devices on the priority list.
Another extraordinary thing about Linksys Velop is that your gadget will connect to the nearest node’s signal automatically, without any need to sign in again. That is one of the many reasons why Wi-Fi mesh systems are better than simple routers or wifi repeaters.
The absence of a USB port means that connecting a portable USB hard disk for data back-up is out of the question. You also can’t connect with other gadgets like cameras, printers etc.
Moreover, having only 1 LAN port limits your to the number of wired devices that you can connect to the home network.
For those people with Smart Homes, this mesh wifi system will be an awesome network to invest in your money as it works perfectly with Alexa, features Bluetooth communication and is bolstered by the Linksys Smartphone App.
Although it costs a lot, it has some amazing features like parental control, speed test, guest access, and many others which make its usage much easier. You can even ask Alexa to switch on the guest network or remind you about the guest network name and password.
Netgear Orbi Review
- Ultra-performance Mesh WiFi network blankets every inch of your home in super fast and seamless WiFi connectivity - room to room, wall to wall, floor to floor
- Eliminates WiFi dead zones and buffering - 5,000 square feet of consistent coverage - with speeds up to 3Gbps
- The most award-winning Mesh WiFi system on the planet: PC Mag, CNET, Wirecutter, Forbes, SmallNetBuilder
Last update on 2023-03-22 at 19:50 / Affiliate links / Images from Amazon Product Advertising API
Netgear Orbi is a revolutionary wifi system which not only features a dedicated backhaul wireless band (5Ghz with 1.7 Gbps link speed) between the nodes but also a USB port to connect directly to external peripheral devices like scanners, printers, office equipment etc.
Each unit has also 4 LAN Ethernet ports (3 ports on the central Router unit) for wired connections of other home electronics (smartTV, video streaming player, game consoles etc). Moreover, firmware Version 2.1.1.16 and later supports also Ethernet wired backhaul as well (in addition to wireless backhaul).
Initially, Orbi’s positioning was a little bit different compared with other true mesh wifi systems. The product was not considered a true mesh system but rather a Star-topology network (hub-and-spoke).
In a Star-topology network there is one central Router node and the other devices are Satellite nodes (called “extensions”) connected to the central Router node.
However, with a recent firmware update, the Satellite nodes can now communicate directly with the other Satellite nodes (in addition to the base Router node) thus forming a mesh network like other brands.
Another important point to consider is that the base Router Orbi node does not include an internal modem so you must have an ISP modem/router in place to connect the Orbi to it for Internet access (just like the Velop model).
The only exception is the CBK40 model which includes an embedded Cable Modem (DOCSIS 3.0). This means that you can get rid of your existing ISP cable model and save on rental cost. Its compatible with Xfinity from Comcast, Spectrum, Cox, and more.
We have created a network diagram to show you some possible connectivity options of Netgear Orbi with other devices:
As you can see from the diagram above, the Orbi Router unit is connected to the ISP modem/router with an Ethernet cable. The Orbi Satellite units are then connected to the Orbi Router with WiFi backhaul (or with wired backhaul if you want).
All devices in your home (laptops, PC, tablets, smartphones, printers etc) can be connected to either the Router or Satellite units using WiFi connectivity or using Wired Ethernet cables connected to the included LAN network ports of the Orbi devices.
How to Install
Important Features
- Area coverage of 5000, 7000, 10000 square feet etc (2-pack, 3-pack, 4-pack respectively),
- Combined WiFi Speed: 3,000 Mbps (1733 + 866 + 400 Mbps) (theoretical maximum).
- Tri-band WiFi technology (AC3000).
- Supports any ISP provider (needs to have an external ISP modem/router to connect with).
- Router Node: 1 WAN Ethernet + 3 LAN Ethernet ports (Gigabit speed).
- Satellite Node (extender): 4 LAN Ethernet ports (Gigabit speed).
- USB port on each node.
- Beamforming support.
- Alexa Integration and Google Assistant integration.
- 2.4 GHz Radio Frequency (802.11b/g/n), 5 GHz Radio Frequency (802.11 ac).
- Seamless roaming technology (all nodes form a single mesh network with one WiFi name).
- Security: WPA2-PSK support.
- MU-MIMO technology and Beamforming (via the 802.11ac wifi standard).
- Supports management and configuration via both Web based access and Mobile App-based setup.
- 1,500, 2,000, 2,500 sq. ft. add-on satellite nodes for extra coverage.
- Access to advanced features such as guest network, device prioritization, parental control, access filtering, VPN, port forwarding etc.
- Much Faster WiFi speed performance when compared to Velop (based on numerous independent tests).
- Dedicated backhaul link at 5Ghz with 1.7 Gbps speed for connecting the satellites to the main router node.
- Easy management using both web browser (from your laptop) or mobile app.
- Included USB port is very handy for connecting peripheral devices (such as portable hard disk).
- Additional Gigabit Ethernet ports are very useful to connect computers, smart TVs etc to the network.
- Wall mounted.
- Single name WiFi SSID provides easier connectivity management.
- Only 1-year warranty and 3-months of tech support.
- Mobile-app is rudimentary.
- No built-in ISP modem (you must connect to an existing ISP modem/router).
Netgear Orbi makes sure that every area of your home receives good Wi-Fi coverage, hence it is also known as the “Orbi the Wi-Fi Blanket”.
This mesh system comes along with the main router which is even larger than the two satellite nodes, make the design a little larger and bulkier than other brands. This is where Orbi failed against Luma, Google WiFi and Eero, in designing a compact system. However, one must see the performance and features offered as first priority and then consider the design in our opinion.
The 2-pack RBK50 system is the most popular one and covers the needs of most home owners (up to 5000 sq.ft). Selecting also a less costly add-on satellite (like the RBW30) you can add WiFi coverage by extra 1500 sq.ft without increasing the price too much.
Working on the foundation of Beamforming, which allows you to set a priority for connectivity of your favorite devices, makes it a very efficient wireless system to cover the needs of every situation.
Netgear Orbi allows you to set only one Wi-Fi name (SSID) and does not have the ability to differentiate which node’s signal you are using. This makes it easier for users to connect to the network compared to other systems.
The incorporated USB port gives it an advantage over Linksys Velop since you can now connect peripheral devices like printers, USB hard-disk etc and share them over the wireless network.
This brand is a tri-and-stream (2×2) router which comes with a dedicated backhaul. Dedicated backhaul provides you an additional 5GHz band apart from the primary 2.4 GHz and 5GHz. This additional band is for communication between the router and satellites.
This implies the primary bands are only required for transmitting data between your devices and Orbi thus leaving the dedicated wireless backhaul link for connection between satellites and router.
The outcome is fast and solid Wi-Fi signals which prevents the bands from getting overloaded. That’s one of the reasons the Orbi system is much faster than the Linksys Velop (some independent tests showed Orbi to be 34% faster than Velop).
Comparison Between Linksys Velop Vs Netgear Orbi
Let’s take a look at both of the products discussed above and compare them under the light of various aspects to see whether the difference in price between the two mesh kits is justifiable or not.
Main Similarities
Let’s first see the main similarities between the two systems.
Device Prioritization
This is an extremely cool component of both of the WiFi mesh systems. Device prioritization plays its role where there are some devices which require the best WiFi signal strength to operate at optimum conditions.
It is a feature which allows you to set various devices as priority so that they have the best internet connection strength. So, what the software does is that it performs some calculation and allocates better signal strength to some particular devices on the priority list.
Both Velop and Orbi come with this feature, however, from user experience, Velop’s is a little better. To begin with, it is quite easy to set-up and you can add up to 3 devices in the priority list. For Smart Homeowners, Alexa, of course, is the top in priority.
Smart Home Integration
Both systems can integrate with Amazon’s Alexa. Orbi however connects also with Google Assistant as well. The integration is basic though. For example you can switch the guest network on/off, ask Alexa to tell you the guest network password etc.
Additional Similar Features
There are a lot of additional features that these systems offer, so let’s have a look at them too.
We will first begin with Guest Access. It allows you to create a separate temporary network for your guests so that your primary network is not overloaded and also you won’t have to give the password of your main wireless zone to guests. Then there’s Parental Control which enables guardians to monitor their kids’ activity on the web.
Another cool feature is Beam Forming, a top-notch technology which scans your whole house and concentrates the signals on those devices which are connected to the Wi-Fi, instead of simply broadcasting the signals. It is available in both models.
MU-MIMO is another feature present in both of the systems. It is a progressive wireless communication technology that enables a router to communicate with numerous devices at the same time. This technology helps to boost the network by reducing the waiting time for a device for signal reception.
Main Differences
The main differences between the two systems which we believe have strong weight in selecting one of the two products are the following:
Performance
It is quite difficult to compare the speed performance of one with the other because the conditions vary from home to home.
However, there are several independent tests online which show the speed performance on Netgear Orbi to be far superior to that of Linksys Velop.
Connectivity
This is an extremely crucial area of discussion, considering that connectivity is among the main aspects to consider when purchasing a mesh system. Connectivity can be viewed from two different angles – hardware and software.
Linksys Velop features two Ethernet ports, one for LAN and the other for WAN. It gigantically lacks on the feature of a USB, which is the reason why Netgear Orbi has received a famous spot in the business world with the “Netgear Orbi for Business”.
While main input for Linksys Velop is the LAN, you can directly make a connection between an external device and Orbi through the USB port in addition to LAN wired port. Also, Orbi comes with 4 LAN Ethernet ports and 1 WAN port (the one connected to the existing internet router), while the rest for making connections with the LAN-enabled devices, such as TVs, printers, scanners, consoles, etc. If you consider the hardware input/output, then Orbi wins the day.
The data link protocols for both the mesh systems are the same. You can connect utilizing Ethernet, Gigabit Ethernet IEEE 802.11a, IEEE 802.11b, IEEE 802.11ac, IEEE 802.11g and furthermore IEEE 802.11n. While Orbi misses out on Bluetooth, Velop tops with this feature included (for management purposes).
Final Conclusion
Click to See our Recommended Product
It all comes down to personal preferences and choosing the mesh system which suits your needs better.
There are some crucial features and performance statistics that Orbi wins over Velop hands down. Dedicated backhaul between nodes (both wireless and wired), much faster speed performance, USB port etc are some of the important features of Orbi that make it a better choice compared to Velop in our opinion.
Hi, can you let me know what you think about whether the Orbi or the Velop would be the best product for me? I have read that the Orbi needs to be placed in the centre of the home but I can’t do that as my main router is in the front corner of the house. In between that and the main daily living area (which is on a ground floor extension) there are some brick walls and more than one steel RSJs. We have a large, old, brick-built house house with a room on the third floor in the converted attic.
thanks!
Hi Richard,
The 2-unit Orbi comes with a base “Router” unit and a “Satellite” unit. You will need to connect the “Router” unit with an ethernet cable to the main router of the house. Then you can place the Satellite unit to the main living area. If you need more coverage later on you can buy one more smaller satellite unit but this might not be needed.
If you go with Velop. you will still need to connect one of the Velop units with an ethernet cable to the main house router and then place another Velop unit to the main living area. So basically your setup will be the same for both Orbi and Velop.
Independent tests show that Orbi has better performance (speed) than Velop. I would recommend to buy the 2pk Netgear Orbi
Thank you. That is very helpful.
I had one more question. Do you know the difference between the Orbi RBK40, RBK50 and RBK53? thanks very much!
Hi Richard,
Sure, let’s see the main differences between the three models:
RBK40: covers up to 4,000 square feet. This is a 2pk system and comes with 1 Router unit and 1 Satellite unit. Also, the combined WiFi speed of each unit is 2,200 Mbps (dedicated backhaul channel speed between Satellite and Router is 866 Mbps).
RBK50: covers up to 5,000 square feet. This is again a 2pk system and comes with 1 Router unit and 1 Satellite unit. Also, the combined WiFi speed of each unit is 3,000 Mbps (dedicated backhaul channel speed between Satellite and Router is 1700 Mbps).
RBK53: covers up to 7,500 square feet. This is a 3pk system and comes with 1 Router unit and 2 Satellite units. Also, the combined WiFi speed of each unit is 3,000 Mbps (dedicated backhaul channel speed between Satellites and Router is 1700 Mbps).
In your scenario I would recommend the RBK50 and if you are still not covered you can buy one more Satellite unit.
Thanks again for your helpful reply. I will try to purchase it through the link on your site, however it does take me to the US Amazon site and I am in the UK so not sure it will work!
Here’s the UK link: https://amzn.to/2ElqKTX
Thanks Richard
Got rid of Orbi as worked fine for a few months and then kept dropping connection intermittently. Velop tri-band has proved to be much, much more of a stable system.
Robert,
Thanks for your feedback. Many people solved their Orbi connection problems with firmware updates. The latest one works pretty well.
Had the Orbi RBK44 and it was terrible. None of the my wifi cameras would stay connected after a few mins and our phones were terrible using wifi calling. I am returning mine and may going to give the RBK53 a shot. If that does not work I am going to try Velop.
The RBK44 is an older model. Certainly the RBK53 will be a better option (make sure to update to the latest firmware as well).
Harris
excellent comparison of the two systems i have narrowed my research to. the connectivity issue gives pause for the orbi, but you say it’s fixed with firmware upgrades? i’ve read complaints about side effects of the upgrades. anything to that?
Also, just checking prices and specs, it seems like a no-brainer to get the RBK53 rather than the RBK50. whattaya say?
Mark, thanks for your comment and feedback.
The Orbi is in my opinion a great choice in the mesh wifi market. For every product out there you will find people complaining. This is inevitable.
Netgear fixes and updates the Orbi models so yes most problems have been fixed already.
The RBK53 is the most powerful model and is also the one with the best coverage out there. So if budget is not an issue for you, I would recommend the RBK53 over RBK50.
Good article but I do have a question. My property is large and the linear distance from the router to the furthest point means I need a satellite mode connecting to a second satellite which in turn connects to the router connected unit. So if restricted but a star topology then the set up will not work. Does the netgear support true mesh or would I need to get the velop to do this?
Thanks
Andy, yes the Netgear Orbi can work in this topology with the Daisy-Chain functionality whereby you can connect satellite to satellite (https://blog.netgear.com/blog/daisy-chain/).
I was wondering about the RBK23 as we have a 2 storey house with the modem upstairs in as the front corner. The top area is larger and our current system ( 2 airport express) works ok, but downstairs lags so I wondered if 3 would be better. Is there much difference between rbk23 and rbk53?
Definitely a 3-unit system will help a lot since you can also do “daisy-chain” between satellites. If you have the budget, the RBK53 is more powerful (bigger and more internal antennas), but the RBK23 is great value-for-money as well.
Was going to get the Orbi RBK50 based on this until I noticed at the last minute that it doesn’t have a USB port, at least not that I could find. I need a reasonably priced, decent coverage, mesh router with a USB port just for easy of accessing my external hard drive without having to hardwire it to my laptop every time I want to access it. Any recommendations?
Sue,
Unfortunately you will not find a mesh wifi system supporting USB storage (although many brands have a USB port, this port is reserved for future use and does not support USB hard disk for the time being).
If the USB storage functionality is very important to you I would suggest the following setup:
1) Buy a regular standalone WiFi router which includes a USB port (almost all Netgear routers have a USB port).
2) Buy the Netgear EX8000 mesh wifi extender to create a mesh network with a single SSID in your home.
Let me know if you have any questions.
Harris
Just purchased a set of Netgear Orbi RBK40 and it has been working fine now for over 24 hours. Some quick questions:
1. My old router Netgear R7000 is now redundant. Can I reuse it in one of the 3 bedrooms for a better reception than just the RBK40? Have I got to reconfig it as AP?
2. What is the difference between AP and router mode?
3. If I connect a HD thru the USB on RBK40 main router? How can the PCs connected to the network be able to use this HD?
4. In R7000, I can config 2 bands 2.4 and 5 but I can’t see this during the setup of RBK40.
Thank you for your assistance.
1) You can connect the R7000 with a cable to the Orbi and configure the R7000 as AP (Access Point).
2) Router mode assigns IP addresses to client devices but in AP mode the device acts just as a repeater.
3) Although the RBK40 has a USB port, it is not guaranteed that a USB HD will work on it (some people tried it and worked though but in most cases it doesn’t work). You will have better luck connecting a USB HD on the R7000 and use the Readyshare netgear app
4) On Orbi unfortunately you can’t separate the two bands. They work simultaneously and each device is automatically connected to the best band and connection.
I have the RBR50 system in my home (1 Router, 2 Satellites) and I can use it as modem for my PPPoE connection with CenturyLink fiber. I saw this mentioned as a feature with the Velop system but it is absent from the Orbi features.
Thanks for your comment. Yes indeed, the Orbi supports also PPPoE connections as well. Not mentioning it in the article does not mean it is not supported (its impossible to mention all available features
Hi there. Great comparison. I was about to invest in the Velop but am now convinced to get the Orbi (RBK50).
My question is, I’m a Mac user and have the TimeMachine (which is my wifi at the moment). Will I be able to hook up the TimeMachine to the Orbi and continue to use it or will it conflict with Orbi’s signals?
I have some older Macs which I’m afraid are not supported by the Orbi (like a Mac Mini pre-2014).
I hope my printer connects too…
Thanks in advance,
Yvette
Yvette,
I didn’t understand what you mean “hook up the TimeMachine to the Orbi” ? The Timemachine is a backup solution for MAC…how is this related to WiFi?
The Orbi supports also older WiFi devices and the Mac Mini will most probably work fine.
Thanks for the response.
I should have been clearer. The TimeMachine is also a WiFi. So I can back up a machine as well as use it as my WiFi. Currently it’s connected via ethernet to the router modem.
I guess I wanted to know if I connect the Orbi to the modem, and I connect the TimeMachine to the Orbi via Ethernet cable? The modem just has one ethernet outlet.
-Y.
Yvette,
Yes that will work. Connect the Orbi router unit to the modem and the Timemachine to the Orbi router (via cable). This setup will work fine.
Super!! Thanks so much.
Appreciate the guidance and help.
What do you think of the newer Velop product compared to the Orbi? I believe it is called the Linksys MX10 Velop WiFi 6 System.
Michael,
Actually I have compared Linksys MX10 with the Orbi WiFi 6 system here: https://www.tech21century.com/best-wifi-6-mesh-systems-comparison/
TL&DR: The MX10 is a great product.
Hey i have a few questions that i was hoping you could answer.
What would you recommend in my circumstance
the main hub will be about 15 meters away from the satellite in a granny flat. (1 brick wall potentially 2 walls)(most likely requiring a hop from satellite to satellite) or do i go the velop as it communicates between the two. I have read about the daisey chain for the rbk50 they have introduced so i am kind of stuck on what to do. Any advice would be Amazing!
Mitch, from people who did some tests on the satellite distance, 15m is on the limit. Especially if you have also brick walls in between, the signal will not be strong enough to the satellite (even if you do cascading). I would request using a powerline ethernet adapter to bring ethernet to the granny flat and then connect a satellite to the powerline adapter (it will be similar to ethernet backhaul).
Hi just a quick question, by budget I need to define between RBK23 and Velop WHW0303 (3-units both cases). requirements are 5000 ft2 / 3 floors / 6 rooms / modern house with brick walls. Is Orbi my best alternative?Thanks in advance for your assistance,
Both Orbi and Velop will work fine in your case. Since they are both 3 devices, you can place one in each floor. Depending where the main router will be located, will be a deciding factor whether to buy the Orbi or Velop. If the router can be installed at the middle floor, then Orbi will be great. Otherwise, go with Velop because it has better mesh connectivity regarding satellite to satellite connections.
hi am considering the RBK 20 model. what is your review /feeback on the same. What is the maximum input broadband speed its supports thanks
The RBK20 is a pretty good budget option for smaller houses (around 3000 sq ft). Although it has 2 units you can always add additional satellites later on.
There is no limit on the broadband speed. You can even use it on a gigabit connection. However, the RBK20 (AC2200 wifi) is ideal for internet speeds of around 150 Mbps and lower.
Nice article!!
Though it covers most of the important points, i still have 1 more query which is not covered here.
What is the maximum number of satellites either of them covers. This will help to implement the mesh system for very large properties which have over 7-8 bedrooms & multiple floors spanning around 25-30K SqFt area.
DeeZ, have a look at the link here about the number of satellites supported on Orbi: https://www.tech21century.com/netgear-orbi-questions-and-answers/#How_many_Satellites_can_you_connect_to_the_Orbi_Router
Unfortunately I don’t have such info for the Velop system.
Moreover, for such very large properties, maybe the Orbi or Velop products won’t be appropriate. Note that the Orbi and Velop are residential products and not suited for large properties. Such properties are better covered by Access Points connected with ethernet wires on a central point.
Agreed, nothing beats wired system.
But since there is no re-wiring possible we are looking forward to a Mesh Based system for residence.
I had a word with Linksys about their Mesh Solution and the reply i got is that we can add more than 10 Satellites in one Mesh , which i think is highly unlikely and this information is not published on website also.
Also do you recommend if we mix and match Wired & Mesh System with same SSID & Password to have a seamless system?
DeeZ, yes a mix and match between wired and wireless is possible and will work fine. You can use the same SSID and password as well.
I’d like to know what is the maximum line-of-sight distance that may exist between orbi satellites in their mesh network. Also if the 5 GHz is used for back-haul, and 15 feet is the usual quoted range for 5 GHz, how can the backhaul channel be successful if the satellites over over 100 feet apart?